Processing & Pump Equipment

Model #500U9MS, Serial #C1894A
NB #3266
Dimensions: 54” diameter x 64” Side Wall
Stainless construction
Side and Bottom Jacketed
- MAWP Jacket 100 PSI @ 338 degrees F
- MAWP Internal 30 PSI @ 275 degrees F
- Jacket tested
Side scrape and bottom scrape agitation

Serial #96260
Air Cooled
Refrigerant Type: R-22
9.8 Ton Capacity
10 HP Compressor
2 HP Coolant Pump
24 GPM Flow Rating

Stainless Contact parts
Sanitary Centrifugal Pump
5 HP drive / 3450 rpm
ABB VFAC Speed controller

Stainless Contact parts
Sanitary Centrifugal Pump
5 HP drive / 1750 RPM
2” x 1.5” Tri Clover fittings

Model #R4R
Serial #H-1979
Neoprene Impellors
Stainless head, fittings and volute
3” Inlet / Outlet, Sanitary SS Threaded Bevel Seat Fittings
5 HP / 1745 RPM Reliance XT Drive

Model #R4BS
Serial #100124683-01-01000
Neoprene Impellors
Stainless head, fittings and volute
3” Inlet / Outlet, Sanitary SS Threaded Bevel Seat Fittings
3 HP / 1750 RPM Reliance XT Drive

Cherry Burrell 5 HP Sanitary Centrifugal Pump
Stainless Contact parts
Sanitary Centrifugal Pump
5 HP drive / 3450 rpm
2” x 1.5” Tri Clover fittings

- Model Number PNP-600
- Serial Number 1401
- Manufacturer: Goodnature Products, Inc., Buffalo NY
- Manufacture Date 11/20/2007
- Factory Rated (Type PNP-600) 10 Gallons Per Minute (maximum product flow)
- (3) Plate Heat Exchangers (#1 - 26 plates, #2 - 119 plates, #3 - 27 plates)
- Parflow MRC5000 Temperature Chart Recorder
- Unibloc Positive Displacement Pump

Armstrong FLO-DIRECT 5000 Instantaneous Direct Fired Gas Water Heater
Model #AFD-5000
Serial #1156
2016 Electrical and PLC Controls upgraded
MFG. by Armstrong, Three Rivers, MI.
Stainless construction
5,000,000 BTU P/HR. rating
Direct Fired Gas
CTE (Complete Thermal Exchange Technology)

Stainless construction
3” Holding tubes
9 Passes @ 12 feet long each, plus looped ends
108 Feet overall pass length
Last Used in Dairy Application

Stainless Construction
3” Stainless Holding Tubes
8 Passes @ 7 feet long each + Loops
Last Used in Dairy Application

Stainless construction
3” Holding tubes
7 Passes @ 10’ long each, plus looped ends
130”overall pass length
3” Tri Clover Fittings
Last used in a Dairy Application

Model #MTCB-18-14
Serial #069227
MFG. by MTC - Material Transport Company, San Antonio, TX.
Last used in a major food plant
Stainless Blender with SS Hopper
Stainless construction
18” x 14' Long Stainless food grade Conveyor

Model #N-250
Serial #397432-1
2000 Year of MFG.
54” dia. x 30” side wall + dish bottom
Closed Top Kettle

Serial #F9050-1
NB #9542
Dimensions: 72” dia. x 16” Sidewall + 20” Coned Bottom
Stainless Steel Construction
Jacket rating 90 psi @ 400 Degrees F
Dual Motion Side Scrape Sweep Agitation

Stainless construction
3” Holding Tubes
9 Passes @ 10 feet long each
Last Used in Dairy Application

Manufactured by HESS Machines International
Hess H-25 Ozone Generator
-Model #H-25, Serial #216609
-4.5 g/hr. Ozone from 15 SCFH Dry Air at 1% by weight
-Ozone generated from dry air with integrated air dryer
-Water cooled ozone generator
-Adjustable Output
-Operating Pressure: 0 to 13 PSI (0.7 to 0.91 Bar)
-Rated Flow: 7.08 LPM (15 SCFH)
-Concentration at Rated Flow: 1%
Hess T-150 Stainless Ozone Tank
-Model #T-150, Serial #216609
-150 Gallon Capacity
-24” dia. x 60” sidewall
-Stainless Construction
-Rated Flow: 340.69 LPM (721.87 SCFH)

125 Ton Rotary Liquid Chiller
Model #RTWA1254YA01
Serial #U94L04336
Glycol / Water Cooled and Condenserless

Stainless 2” Tubular Base Frame Construction
Tank #1 and Tank #2
40” Dia. X 36” SS Single Side Wall
Mfg. Anderson & Dahlen Inc.
Stainless Construction
SS Split Hinged Lids
Open Top
Coned Bottom
1.5” Center Discharge
Mixer mounting bracket
Load Cells, Model JBOX 303A-4-SS

Serial #65E511
Batch Processor
Coned Bottom, Dome Top
Jacketed Side and Cone Bottom

Serial #1325-2004, Year of Mfg. 2004
HTST Pasteurizer System
Rated 10 to 12 GPM; based upon product specs
Stainless Skid Mounted System
300 Gallon SS Feed Tank
50 Gallon SS Balance Tank
Sanitary centrifugal pumps
SS Interconnecting piping, valves, fittings, gauges
Pneumatic valves
SS Holding tube
SS Plate and Frame Heat Exchanger
Allen Bradley Panel View 900 Touch Screen
Allen Bradley PLC Controls

3/4 HP / 1735 RPM

Model #LS30S66
Serial #LS30107571
(2) 30” dia. Stainless Screens
Stainless contact parts

H.D. Series, Model #C215MDG18T-S
Serial #117131-02, WASHDOWN
2" x 1.5" Tri Clover Fittings

Model #C216ME
Serial #82-1526-8C
Stainless impeller
Tri-Clover stainless fittings
1 HP / 1745 Drive

Model #D-033VF, Serial #44613-4
1/3 HP / 1725 RPM
SS Shaft and 3 Blade SS Propeller

Size : 2" x 1.5", Model # 16-71A
SS centrifugal pump
Stainless impellers
5 Hp / 3450 rpm drive Motor

Model #GHS2NK9-B0001, Serial #1093658
2" x 2" fittings
5 HP Drive / 1725 RPM

Size : 2" x 2.5"
Model # GHC-2, Serial # 96-3-23440
Stainless impellers
5 Hp drive Motor

Mfg. by Highland Equipment Company
Serial #45752
Stainless skid mounted, tubular frame design
200 Gallon Stainless CIP Tank
Alfa Laval SS Centrifugal Pump
Tube & Shell Heat Exchanger
Stainless Multi-Port Divert Panel
Micro Motion Mass Flow Meter / Sensor
Multiple Pneumatic valves

Tri Clover 3" SS Butterfly Valve

Model #1510-2
includes :
- (2) Vacuum Pumps
- 1.5 HP

Stainless Construction

Type X5C25
Serial # RO5419866-01
1/4 Hp / 1725 rpm

Skid Mounted on SS frame
Allen Bradley PLC
5 HP Centrifugal Pump
SS Control Panel

Model #2AK31-LX, Serial #0792000
5 HP Briggs & Stratton
Gas powered engine
2" in / out

Model #9634059698, Serial #823814-01
Description Code LKH45M145SSS2ES14AA
1.5 HP / 1750 RPM
3” Tri-Clover Inlet Fitting
4” Tri-Clover Discharge Fitting
Tri-Clover Stainless Fittings
Stainless Impellor and contact parts
Electrical 208/230/460 Volt / 60 HZ. / 3 Phase

Mfg by Grundfos
Model # CRN8-40 U-A-AUUE
Vertical Multistage Centrifugal Pump
Size : 2" x 2", 42 GPM
172 Feet
3 Hp / 3450 rpm

Type JQ4-A-A-CVBP
Model #A96001204-P1-9528
1.5” x 1.5”

Mfg by SHIPCO Model #62.DC, Pump Type 1100, Serial #41217
Rated 9 GPM
Resevoir - 16" L x 12" W x 12" High
1/2 HP 3450 rpm motor

Model Unknown
SS Contact Parts
Tri Clamp fittings

#D5A302
6" x 6" - 8 Bolt flange fittings
40 HP Drive / 1760 RPM

Size 5 GPM
3/4" fittings
Positive Displacement pump
BRASS Construction
Marathon 1.5 hp motor / 1725 rpm

12" x 12" x 12"

Model #M80AB-2
Housing Material 304 SS, Impeller Material 316 SS
Aquatec MASCONTROL, Model #MC-DV-222-101
SS Fittings

Model #4Z336, Serial #0289
1/2 HP / 1725 rpm Dayton SpeedAire Motor
Electrical 115 / 208/230 Volt / 60 Hz / 1 Phase